Full Technical Test Data
LIGHTFE UV301D 365nm
Full published measurement and product information from our UV flashlight testing record.
Continuous Output Results
Published output, retention, and runtime values from the continuous-output test record.
UV Geek UV Energy Index
30
Output Retained — 10 Min
73%
Output Retained — 30 Min
0%
Continuous Operating Time
12+ hr
Power Curve
UV Irradiance at Distance
UV irradiance measurements are shown in µW/cm².
| Distance | UV Irradiance |
|---|---|
| 10 ft | 14 µW/cm² |
| 20 ft | — |
| 30 ft | — |
| 40 ft | — |
| 50 ft | — |
| 60 ft | — |
Amazon Product Record
Exact Amazon Listing Name
Black Light UV Flashlight 365nm Blacklight UV301D with LG LED Source,Black Filter Lens, Max.3000mW high Power for Resin Glue Curing Light, Rocks and Mineral Glowing,A/C Leak Detector
How UV Geek UV Energy Index Is Calculated
During the continuous-output test, the Linshang LS128 measures cumulative UV energy density. The instrument reports accumulated energy in millijoules per square centimeter (mJ/cm²).
Dividing by 1,000 converts the cumulative energy density from mJ/cm² to J/cm². The resulting numerical value is rounded to the nearest whole number and reported as the UV Geek UV Energy Index.
Calculation for this tested flashlight
29691 mJ/cm² ÷ 1,000 = 29.691 J/cm²
UV Geek UV Energy Index = 30
The UV Geek UV Energy Index is a derived comparison metric, not an industry-standard unit of measurement. It should not be confused with instantaneous UV irradiance measurements such as µW/cm².
Testing was conducted by UV Geek using consistent, documented procedures and factory-calibrated measurement equipment. Published results and derived metrics reflect the specific units tested, the recorded measurements, and UV Geek’s interpretation of those data.