Full Technical Test Data
UV Beast V2 385–395nm Flood
Full published measurement and product information from our UV flashlight testing record.
Continuous Output Results
Published output, retention, and runtime values from the continuous-output test record.
UV Geek UV Energy Index
34
Output Retained — 10 Min
60%
Output Retained — 30 Min
53%
Continuous Operating Time
12+ hr
Power Curve
UV Irradiance at Distance
UV irradiance measurements are shown in µW/cm².
| Distance | UV Irradiance |
|---|---|
| 10 ft | 57 µW/cm² |
| 20 ft | — |
| 30 ft | — |
| 40 ft | — |
| 50 ft | — |
| 60 ft | — |
Amazon Product Record
Exact Amazon Listing Name
uvBeast V2 385-395nm Black Light UV Flashlight | High Definition, Flood Effect, Commercial/Domestic Use, Works Even in Ambient Light, USA Stock, Engineered by uvBeast
How UV Geek UV Energy Index Is Calculated
During the continuous-output test, the Linshang LS128 measures cumulative UV energy density. The instrument reports accumulated energy in millijoules per square centimeter (mJ/cm²).
Dividing by 1,000 converts the cumulative energy density from mJ/cm² to J/cm². The resulting numerical value is rounded to the nearest whole number and reported as the UV Geek UV Energy Index.
Calculation for this tested flashlight
33762 mJ/cm² ÷ 1,000 = 33.762 J/cm²
UV Geek UV Energy Index = 34
The UV Geek UV Energy Index is a derived comparison metric, not an industry-standard unit of measurement. It should not be confused with instantaneous UV irradiance measurements such as µW/cm².
Testing was conducted by UV Geek using consistent, documented procedures and factory-calibrated measurement equipment. Published results and derived metrics reflect the specific units tested, the recorded measurements, and UV Geek’s interpretation of those data.